What is the difference between RP and HVLP

What is HVLP and RP spray guns?

The spray gun is indispensable equipment when it comes to painting. There is a multitude of manufacturers, customizations, and adjustments. But what is the difference between RP and HVLP? and what effect does it have on the application?

Historically, there were first "conventional" spray guns. In order to reduce VOC emissions and create a better working environment, new trajectories were envisioned and the HVLP spray gun became the preferred choice. It was known that HVLP technology was not suitable for atomizing all kinds of materials, and RP technology saw the light of day. RP technology also achieves a transfer efficiency of 65%, simply at a higher pressure.

HVLP stands for "High Volume Low Pressure" and denotes an internationally recognized application method.

RP is a SATA acronym for "Reduced Pressure" which is optimized high-pressure spray guns that achieve a great finish and transfer efficiency of over 65%.

Spray gun for multiple purposes

If we take a comparison on the popular spray gun, the SATAjet 5000 from the German manufacturer SATA, which is known to set the standard or a very high one anyway. Then it can be roughly divided this way.

HVLP Spray guns or "The Super Saver"

Recommended for application of basecoat because it offers maximum transfer with minimal material consumption. HVLP is also suitable for water-based basecoats and provides a great spray of metallic colors. SATA HVLP spray guns can be recognized by the green ring on the air cover.

• Slower application than RP
• Higher air consumption
• Good for basecoats
• Good for water based paints
• Good for spraying pearls

RP spray guns pr "The Super Speed"

Recommended for clear coat and 2K applications as the application rate is higher. SATA RP spray guns can be recognized by the blue ring on the air cover.

• Faster application
• Lower air consumption
• Good for clear coat
• Good for high solid
• Good for polyurethane

Note! Replacing the nozzle does not change an RP to an HVLP or vice versa. However, SATA offers a 1.2W nozzle on the RP model, which is designed for use with water-based material.

We always recommend and refer to the instructions from manufacturers of paint system and the spray gun.

WANNA KNOW MORE?

We hope that the above gave you a better insight into RP / HLVP versions within SATA. If you are still in doubt - please do not hesitate to contact us on +45 6315 6666.

Then we will be happy to help you find out what you need!